Guide

How to Store a Snow Blower Between Seasons

Updated on · By the Sale On Snow Blowers team

To store a snow blower between seasons, follow its manual, clean and dry it, prepare the engine or battery for storage, and keep it in a dry, covered place. Fuel and battery steps vary by model, so use the maker's instructions.

On this page (8 sections)
  1. What should you do before storing a snow blower?
  2. How should you prepare a gas snow blower for summer storage?
  3. How should you store a cordless snow blower battery?
  4. Where should you keep a snow blower between seasons?
  5. How can you cover a snow blower without trapping moisture?
  6. What should you check before storing a snow blower outside?
  7. What should you inspect when taking the snow blower out of storage?
  8. Which storage steps matter most for your snow blower?

To store a snow blower between seasons, follow its manual, clean and dry it, prepare the engine or battery for storage, and keep it in a dry, covered place. Fuel and battery steps vary by model, so use the maker's instructions.

A few careful steps can make the next start easier and keep moisture, dust, and debris off the machine. Start with the manual because storage needs differ between gas, corded electric, and battery models.

What should you do before storing a snow blower?

Read the manual first, then clean, inspect, and dry the machine before putting it away. Make a note of any repair or replacement part the snow blower may need before winter returns.

Turn the machine off and let hot parts cool. Disconnect the spark plug wire on a gas model if the manual directs you to do so, and remove a battery from a cordless model only as instructed.

Brush off packed snow, slush, and dirt. Clear the chute and housing with tools or methods approved by the manufacturer; don't put your hands near an auger or impeller.

Dry the machine fully before covering it. Moisture left in a sheltered space can still cause problems, so wipe accessible surfaces and let wet areas air-dry.

How should you prepare a gas snow blower for summer storage?

Use the fuel and engine steps in your snow blower manual. Gas models can have different directions for fuel left in the tank, fuel stabilizer, and carburetor storage.

Work outdoors in a well-ventilated area, away from sparks and open flames. Let the engine cool before handling fuel, and use an approved container if the manual tells you to drain the tank.

Don't assume that every gas snow blower should be stored with an empty tank or with treated fuel. Use the engine maker's directions for your model and fuel type.

For model-specific instructions, check the owner's manual or the manufacturer's support site. Our guide to how long a snow blower lasts can help you decide whether planned maintenance is worthwhile for an older machine.

How should you store a cordless snow blower battery?

Follow the battery manual for storage charge, temperature, and whether to remove it from the machine. Battery care instructions vary, so avoid guessing based on another tool or battery brand.

Keep the battery away from direct sun, heaters, water, and metal objects that could bridge its terminals. Use the storage location and charging method the manufacturer specifies.

Before putting the snow blower away, clear snow and moisture from the battery area. If you use a cover, let the machine dry first and keep the battery stored as directed.

If you're choosing a machine for next winter, compare the tradeoffs in our guide to gas versus cordless snow blowers.

Where should you keep a snow blower between seasons?

Choose a dry, sheltered spot with enough room to keep the machine stable and accessible. A garage or shed can reduce exposure to rain, sun, falling debris, and accidental bumps.

Keep the snow blower away from ignition sources and follow any storage restrictions in its manual, especially for a gas model. Avoid blocking walkways or placing heavy items where they could fall onto it.

If indoor storage isn't available, a fitted cover can help shield the machine outdoors. Measure the snow blower before choosing a cover, including its handles and chute, because universal-fit claims don't mean every machine will fit.

Is the Zettum cover a fit for a larger machine?

The Zettum cover measures 70 in diagonal, 54 in on the side, 33 in at the front, and 45 in high. Measure your machine against those dimensions before choosing it.

Zettum describes the cover as 600D Oxford cloth with a PU coating and includes a portable storage bag. It's designed for many single-stage and two-stage models, but fit still depends on your snow blower's shape and size.

How can you cover a snow blower without trapping moisture?

Cover a clean, dry machine, and check it now and then for dampness or debris. A cover is useful for shielding equipment, but it doesn't replace a dry storage location or proper preparation.

Choose a cover that fits without dragging on the ground or leaving key areas exposed. Secure it as directed, especially if the snow blower will be outdoors in wind.

Which cover suits a standard-size snow blower?

The Himal cover measures 47 x 32 x 40 in and has an elastic bottom. Check those measurements against your machine before buying.

Himal Outdoors describes its cover as 600D Oxford fabric with a PU coating and includes a drawstring storage bag. It's intended for many two-stage snow throwers, so check the fit carefully if you have a single-stage model.

When might a larger cover make sense?

A larger cover may help when your machine's dimensions exceed a standard cover's measurements. WardWolf gives its cover dimensions as 75 in diagonal, 54.7 in long, 30.7 in wide, and 56.3 in high.

WardWolf describes the cover as 900D polyester with two PU coating layers, double-stitched seams, and two air vents. Measure the machine first, since a cover that's too large can be harder to secure.

What should you check before storing a snow blower outside?

Check the cover fit, secure its fasteners, and keep the machine off standing water. Choose a level location where runoff won't collect around the wheels or housing.

The NEVERLAND cover measures 60 x 33 x 45 in, with an elastic front and two straps. Measure your snow blower, including its chute and handles, before deciding whether that size fits.

NEVERLAND describes the cover as Oxford cloth with a PU coating and includes a storage bag. If the machine gets wet under the cover, uncover it when conditions allow and let it dry before covering it again.

What should you inspect when taking the snow blower out of storage?

Inspect the machine before starting it, and follow the manual's restart checklist. Look for damage, loose fasteners, leaks, corrosion, or debris around the chute and auger.

For a gas model, prepare the fuel system and check oil as directed. For a cordless model, reinstall and charge the battery according to its instructions, then check the controls before use.

Clear the area around the machine before starting it, and keep people and pets away from the discharge chute. If anything looks damaged or the machine doesn't operate as expected, stop and consult the manual or a qualified service shop.

Which storage steps matter most for your snow blower?

For how to store a snow blower, the main rule is simple: follow its manual, clean and dry it, and prepare its fuel or battery for the off-season. Choose sheltered storage when possible, and use a cover only after the machine is dry.

Pick a cover by measuring the snow blower and comparing the dimensions and closure style. For more seasonal care and buying guidance, see snow blower deals and care and how to compare snow blower deals.

Frequently asked questions

Should I drain the gas before storing a snow blower?

Follow the engine and fuel instructions in your snow blower manual. Some models call for draining fuel, while others may direct you to use a stabilizer and run the engine; the right step depends on the machine and fuel system.

Work outdoors, away from flames, and let the engine cool first.

Should I remove the battery from a cordless snow blower for summer?

Check the battery and snow blower manuals for the correct storage charge, temperature, and removal steps. Store the battery in the specified location, away from heat and moisture, and don't leave it connected if the instructions call for removal.

Inspect it before the next season.

Can I leave a snow blower outside under a cover?

A cover can shield a snow blower from weather, but a dry indoor storage area is preferable when available. If you must store it outside, choose a level spot, secure a correctly sized cover, and check the machine for trapped moisture.

Follow the manual's storage directions.

What should I do before starting a snow blower after storage?

Read the manual's restart checklist, then inspect the machine for damage, leaks, loose parts, and debris. Reinstall or charge the battery as directed, or prepare the fuel system according to the engine instructions.

Check controls and safety features before clearing snow.